What is the HydroStar system?
The HydroStar system is a water for gas conversion system that will allow you to convert your cars engine to run on water instead of gasoline.
Your cars engine will be able to operate on only the hydrogen and oxygen created by the electrolysis of water.
No traditional fuel including diesel or external electrical generating systems are used or required.
By using this amazing water for gas conversion system your car will no longer emit toxic fumes. The combustion of hydrogen and oxygen produces only water as a byproduct!
The HydroStar system is not only non-polluting, but during combustion it is able to remove harmful pollutants from the air.
The exhaust from the HydroStar system is cleaner than the air outside in big cities!
Thanks to many years of hard work it is not able to convert your car to use water as gas thanks to the principle of electrolysis of water.
Water electrolysis occurs by running an electirc current through water. This breaks down the water into hydrogen and oxygen.
Nothing needs to be added to the water. You can use regular tap water.
Water electrolysis, something that was first accomplished a century ago, has remained inefficient with no practicle use due to its overall
output of energy being less than that which was required to operate it. Thanks to new enhancements in technology it is now capable to convert
any car or vehicle to run on water.
The HydroStar system is the first and, so far, the only practical system desigen specifically to convert vehicles to use water for gas.
The secret of the HydroStar system lies within the HyTronic module. The HyTronic module produces
uniquely shaped electronic pulses of precise frequency and duration at a very low voltage.
The power consumption of the entire HydroStar system is so low it can be powered by your cars alternator, and still have
enough reserve power to run the rest of your vehicles electrical devices.
Is the HydroStar system a perpetual motion machine?
No, the HydroStar system is not a perpetual motion machine but rather a highly efficent, water-for-gas-fuled, electric-mechanical system capable of
creating enough hydrogen and oxygen required to properly power an internal combustion engine.
How safe is the HydroStar system?
Cars using the HydroStar system are far more safer than driving around in a gas powered car.
Cars require tanks of gas holding many gallons of gas to drive a short distance.
Holding large volumes of gas only increases the risk of fire in an accident.
With the HydroStar system, only a very small amount of hydrogen has to be stored within the Hydrostar system.
The only fuel required is water, preferably tap water, which, of course, is not comustible.
Why is the HydroStar system called a conversion system?
With the HydroStar system there is nothing in your car that requires
removal, modification, or disabling. You can power your car using either its
gasoline system or the HydroStar system.
If something ever goes wrong with your HydroStar system, you can simply go back to using gas as fuel.
In the unlikely event that your HydroStar fails, you can easily
switch back to gasoline power.
How does the HydroStar perform?
Using the HydroStar system it is possible to drive anywhere from 50 to 300 miles on one gallon of water.
It all depends on driving habits, terrain, the cars weight, and the ability to enhance the HydroStar system.
If you think about it, efficiency really doesn't matter considering that water is a free and inexhaustible resource
and the HydroStar system produces only water as exhaust.
Can the HydroStar system be used to power other appliances?
Absolutely, the HydroStar system can provide fuel from water to power just about any appliance
requiring natural gas or propane as a source of heat
including space heater and furnaces, stoves, and barbeque grills.
Some of these appliances require a separate power supply to convert 120-volt AC power into 12-volt DC power which
is required by the HydroStar system
You can pick up an inexpensive power supply at Radio Shack or any other electronics store.
By using the HydroStar system you can reduce the cost of your homes electricity to $1.00 a month!
Is the HydroStar System hard to construct?
No, the HydroStar system is
fairly simply to assemble and install. No special tools required, only those found
in a typical home workshop.
The hardest part of constructing the HydroStar system is assembling the HyTronic Module.
This requires average electronics skill at soldering, or can be purchased online.
It isn't required, but using an oscilloscope for tests would help obtain the most effiency from the HyTronic module.
You can always get help
from a local electronics guru if you need help tweaking the HyTronic module.
Is it possible to buy a pre-built HydroStar System?
As of right now it is not possible to purchase a pre-built HydroStar system.
There are many forces out there that would kill any company from mass producing these.
The HydroStarKit was created for the do-it-yourselfer. If you want to star fueling your car
using water instead of gas then you need to download our guide right away and use it to teach yourself how to build
your own conversion system.
